wow!... love it... yeah what are dimples cused by... obviously some irregularity in the manufacturing stage.. but I wonder what causes them
Abstract In situ pressure measurements within dimples formed in glass–steel point contacts under various sliding conditions were performed using Raman microspectroscopy. Experiments were conducted using a ball-on-disc type apparatus in which a circular contact is formed between a rotating glass disc and a rotating steel ball. Film thickness distributions were measured by duochromatic optical interferometry. Polyphenyl ether oil (5P4E) which has a high pressure–viscosity coefficient was used to produce a dimple in the contact area. Experimental results show that the pressure increases locally in the dimple zone and the pressure profile changes, accompanying the changes of the dimple location as a function of the slide-to-roll ratio. The maximum pressure is located downstream the maximum height of the dimple. The rheological response of the oil film under dimple occurrence conditions is discussed.